Road and Construction Projects: Used in large construction projects such as road building, bridge construction, and highway projects to cure newly poured concrete surfaces and increase their durability.
Industrial Facilities: Used on floors of industrial facilities like factories, warehouses, and workshops to enhance waterproofing and durability.
Commercial Buildings: Used on interior and exterior concrete surfaces of commercial buildings such as stores, office buildings, and shopping centers. It increases durability while maintaining aesthetic appearance.
Residential Structures: Suitable for use on floors, garages, and outdoor areas of homes. Provides waterproofing and durability.
Pools and Water Tanks: Used to cure the inner surfaces of pools and water tanks. Provides waterproofing and chemical resistance.
Sports Areas: Used in sports areas such as tennis courts, basketball courts, and running tracks. Enhances surface slip resistance.
Industrial Plants: Used in chemical plants, food processing plants, petrochemical plants, and similar industrial facilities to provide chemical resistance and durability.

Cleaning: The concrete surface must be completely free from dust, dirt, oil, or other residues. The surface should be cleaned with a clean cloth, broom, brush, or pressure water.
Smoothness: Large cracks, holes, or other irregularities on the surface should be properly repaired. Concrete coating cannot adhere properly to rough surfaces and may cause undesirable results after application.
Moisture Content: The moisture content of the concrete surface should be below 80%.
Temperature: Application should be performed between +5°C and +35°C.
Protection Against Rain and Moisture: The concrete surface should not be exposed to rain and excessive moisture during application and curing period.

The application is performed after the concrete and surface hardener have set enough so that the concrete surface is not damaged. It should be applied after the concrete surface water has evaporated and the formwork has been removed, but before joint formation. Shake the packaging well before use. If application is done with a brush or roller, the concrete must have sufficiently set to avoid damaging the surface. For spray applications aiming to achieve a uniform structure, the material is sprayed continuously, evenly, and in a thin layer on the surface. No pooling should occur. After curing applications, the surface must be protected from external factors such as rain and snow. It should not be walked on. The drying time of the material after curing application is 2-3 hours at 20°C.

• Take necessary safety precautions such as wearing gloves, masks, and goggles during application.
• Store the primer out of reach of children and pets.
• If applying outdoors, check the weather before primer application. Avoid applying primer in rainy or humid conditions.
• Clean brushes and rollers with water during and after application.
• Avoid inhaling the product’s fumes.
• Apply in a well-ventilated area.
• Avoid contact with your skin. In case of contact, wash thoroughly with plenty of water.
• Wash your hands with soap and water after application.
• Avoid contact with eyes. In case of contact, rinse thoroughly with plenty of water and seek medical advice.