• On ceramic and tile surfaces
• Used to increase adhesion or reduce surface absorbency on glassy, mosaic, or wooden surfaces.

• The surface to be treated must be cleaned.
• AAny dust, dirt, oil, or substances that may prevent adhesion should be removed.
• The surface must be dry.
• The primer should be applied to the surface in a thin and even layer using a roller.

3.5 kg of Ceramic Surface Primer is diluted with 0.9 kg of water and mixed until a homogeneous consistency is achieved. It is applied in a single coat using a lambskin roller. Ensure that the primer is completely dry before proceeding with the tile application. The primer–water mixture should be stirred intermittently to maintain homogeneity and to prevent settling. The specified times apply at a surface and ambient temperature of 20 °C; the duration increases at lower temperatures and decreases at higher temperatures. The application can be carried out using a brush, roller, or spray method.

• Take necessary safety precautions such as wearing gloves, a mask, and goggles during primer application.
• If applying outdoors, check the weather forecast before application. Avoid applying primer in rainy or humid conditions.
• Clean brushes and rollers with water during and after application.
• Avoid inhaling the primer’s fumes.
• Apply the primer in a well-ventilated area.
• Avoid contact with skin. In case of contact, rinse thoroughly with plenty of water.
• Wash your hands with soap and water after applying the primer.
• Avoid contact with eyes. In case of contact, rinse thoroughly with plenty of water and seek medical attention.