• Applied to the surface before installing new tiles over old tiles.
• Applied before installing a new coating material on highly absorbent surfaces in all types of buildings.

• Clean the surface to be treated. Remove any dust, dirt, grease, or substances that may prevent adhesion. The surface must be dry. If the surface is wet, wait for it to dry.
• Apply the primer in a thin and even layer. Once the primer has dried, you can proceed to bond the new ceramic tiles.

3,5 Kg. of Ceramic Top Primer is diluted with 0,9 Kg. of water and mixed until it becomes homogenous. Apply as a single coat with a roller. Make sure that the primer is completely dry before tile application. The primer-water mixture should be kept homogenous by stirring at intervals and care should be taken not to collapse. The specified times are valid at 20 °C surface and ambient temperature, the time is prolonged at low temperatures and shortened at high temperatures. Application can be done by brush, roller or spraying method.

• Take necessary safety precautions such as wearing gloves, a mask, and goggles during primer application.
• If applying outdoors, check the weather forecast beforehand. Avoid applying primer in rainy or humid weather.
• Clean brushes and rollers with water during and after primer application.
• Avoid inhaling the primer’s fumes.
• Apply the primer in a well-ventilated area.
• If possible, keep windows and doors open during the application.
• Avoid contact with skin. In case of contact, rinse thoroughly with plenty of water.
• Wash your hands with soap and water after applying the primer.
• Avoid contact with eyes. In case of contact, rinse thoroughly with plenty of water and seek medical assistance.