Residential Buildings: In construction, it is commonly used for floor leveling and smoothing in the interior spaces of residential buildings. It is an ideal option for preparing the floor before installing new floor coverings (laminate, carpet, ceramic, etc.).
Office Buildings: It is used in office spaces to correct floor irregularities and ensure that floor coverings are installed properly.
Shopping Malls and Retail Stores: It is used in commercial areas, shopping malls, and retail stores for floor leveling. This helps create a smooth and aesthetically pleasing floor surface, which can enhance the use of interior spaces.
Industrial Facilities: It can be used in factories, warehouses, and industrial facilities for floor leveling and smoothing. This can help in creating floors capable of bearing heavy loads.
Hospitals and Healthcare Facilities: In the healthcare sector, it can be used for floor leveling in hospitals and healthcare facilities. It creates a smooth surface to meet cleanliness and hygiene requirements.
Educational Institutions: It can be used for floor leveling in schools and universities, including classrooms, corridors, and other interior spaces.
Hotels and Accommodation Facilities: It is preferred for floor leveling and smoothing in hotels, resorts, and other accommodation facilities.

Cleaning: The floor surface must be free from dust, oil, dirt, and other contaminants.
Crack and Hole Inspection: Cracks, holes, or voids in the floor must be inspected and repaired if necessary.
Moisture Control: The moisture level of the floor must be checked. It can be applied on damp surfaces, but excessive moisture or wetness may cause issues.
Floor Slope Control: The slopes in the floor must be checked to ensure that the screed spreads evenly.

To prepare the screed mixture, add 6 Lt of water to 25 Kg. powder product and mix the screed with a low speed mixer or drill. It is important that the mixture is homogeneous and without lumps. Let the prepared screed mixture rest for 3-4 minutes. After resting, mix the mixture again for 30 seconds. This step is important to ensure the homogeneity of the screed. Pour the prepared screed mixture into the application area immediately. Since the screed has a fluid structure, it should be poured from one side and continuously. Check the poured screed for air bubbles. Air bubbles can prevent the screed from fully contacting the surface, so they should be removed if necessary.

• Do not apply in adverse weather conditions such as rain, snow, or strong winds.
• Use chemically resistant and waterproof gloves, dust masks, goggles or face shields, closed-toe non-slip shoes, and workwear.
• Ensure the application area is well ventilated if possible.
• Keep flammable materials away from the application area.
• Wash your hands and face with soap and water after application.
• In case of eye or skin contact, rinse thoroughly with plenty of water and seek medical attention.
• If swallowed, seek immediate medical attention.