Exterior Wall Cladding: Decorative plaster applied on thermal insulation boards enhances the aesthetic appeal of the building’s exterior and allows for personalization with various patterns, textures, or colors.
Interior Walls: Decorative plaster can be applied to insulated interior walls to enhance the aesthetics of indoor spaces. Different colors and textures can create a modern and stylish ambiance.
Ceilings: Applying decorative plaster on ceilings can complement the overall atmosphere of the space and add an elegant touch to the ceiling design.
Exterior Architectural Elements: Columns, beams, or other architectural details on the building’s exterior can be covered with decorative plaster to achieve a striking and aesthetic appearance.
Interior and Exterior Columns: Columns in both interior and exterior spaces can be coated with decorative plaster to align with the overall decor and enhance aesthetic appeal.
Garden Walls and Fences: Decorative plaster can be used on garden walls and fences to improve the overall aesthetics of the garden and complement outdoor designs.
Door and Window Surrounds: Using decorative plaster around doors and windows can create a striking appearance and add an aesthetic touch to the structure.

Cleaning: The surface must be cleaned of dust, dirt, oil, paint residues, and other contaminants.
Repair and Correction: If there are cracks, holes, or other damages on the surface, these areas should be repaired with a suitable surface filler or plaster.
Surface Smoothing: To achieve a smooth surface, unnecessary protrusions, bumps, or roughness should be removed. This helps ensure an even application of the plaster.
Surface Primer and Undercoat: The surface can be treated with a primer or undercoat. This creates a stronger bond between the plaster and the surface, improving application performance.
Water Permeability and Adhesion Test: The surface’s water permeability and adhesion properties should be tested before applying the plaster. These tests can enhance the durability of the application.
Correction and Leveling Work: Slopes, roughness, or irregularities on the surface should be corrected before applying the plaster.
Surface Moisture Content: The moisture content of the surface should be checked. Moisture can affect the application of the plaster, so proper moisture levels must be maintained.
Expansion Joints: Expansion joints should be considered for large surfaces or between different materials. This provides resistance against thermal expansion.

Add appropriate amount of water (6-6.5 liters of water/25 kg. powder) into the mixing bowl. Add the powder material and mix with a low speed hand mixer. Rest for 5 minutes and mix until the mortar reaches homogenous consistency. The prepared mortar is applied to the surface with a steel trowel in equal thickness. The application thickness should be adjusted by considering the coarsest grain size in the material. The surface is patterned with circular movements with a plastic or polyurethane trowel. On large surfaces, care should be taken to use the material without a break.

• No foreign materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
• Expired mortar should not be mixed with water or dry mortar and reused.
• It is recommended to apply the product at a temperature between +5 °C and +35 °C.
• Protect from rapid drying in windy weather.
• Do not apply on frozen surfaces.
• Do not apply under direct sunlight.
• Do not exceed the specified application area and usage instructions.
• Do not inhale directly. In case of contact with eyes, rinse thoroughly with water and consult a doctor if necessary.
• The full curing process must be completed, as the adhesive may not reach its maximum strength until fully cured.